EIT/FE Exam Preparation

The Engineer-In-Training/Fundamentals-of-Engineering exam is the first step towards the goal of the P.E. after your name later in life.  P.E. is Professional Engineer - licensed by the state you practice in.

2008 EIT REVIEW SERIES

Sponsored by the ASME Student Section at Penn State Erie

The EIT review is approximately a ten-part series focused on preparing juniors and seniors for their first step toward a professional engineer’s license. A different topic will be covered each week by a professor experienced in that area. Each review class will last about 2 hours (unless otherwise noted) on the dates indicated.

REMEMBER: 

Date Day Room Time Subject Professor
02/06/08 Wed 107 REDC 7:00 - 9:00PM DC and AC electronics Mr. Ron Krahe
02/14/08 Thurs 107 REDC 5:00 - 7:00PM Strength of Materials Mr. Shannon Sweeney
2/20/08 Wed 107 REDC 7:00 - 9:00PM Chemistry Mrs. Jennifer Holt
2/28/08 Thurs 107 REDC 6:00 - 8:00PM Mathematics Mr. Andy George
03/05/08 Wed 208 REDC 3:30 -5:30PM Statics Mr. Ed Evans
03/12/08       SPRING BREAK  
03/19/08 Wed 208 REDC 3:30 -5:30PM Thermodynamics Dr. Russell Warley
03/26/08          
04/02/08          
04/09/08       Dynamics Dr. Khalilollahi
      practice tests / problem solving session

NCEES: Calculator Policy for 2008 FE exams

NCEES: Content specs for the FE exam

NCEES: Other information about the FE exam

* * * * *  EIT/FE EXAM - SATURDAY, APRIL 12, 2008 * * * * *
[Your admission ticket is mailed to the address you used on your application.   You MUST have this ticket to get into the exam !  The location for the exam is also listed on this ticket.  The exam is NOT administered on the Behrend campus.]

Thank you & GOOD LUCK !!!!

ASME Officers