Exit off I-79 at Exit 48 - Southpoint/Hendersonville.
Turn into the Southpoint Complex on Southpoint Boulevard. Stay on Southpoint
Boulevard for 1.4 miles. Straight through at the 1st stop light, straight
through at the 1st stop sign (Southpoint Golf Clubhouse), straight through at
the 2nd stop sign (Technology Drive), pass the lake on your left. Turn RIGHT
at the 3rd stop sign (Technology Drive) - you can see the CAL building on the
left, continue up the hill a short distance and turn LEFT into the parking lot
below the CAL building. Room 102 will be on your left when you enter the
building.
| 9:00 - 9:45 am |
Socialize:
coffee,
orange juice, muffins |
| 9:45 - 10:05 am |
Impeller OD Modal Study, PSU
Erie Mechanical Engineering Technology students: Jeff Amick and Tom
Dziekonski; advisors: D. Johnson and D. Roth |
| 10:05 - 10:25 am |
Heat Transfer
Study of Air Gap Influence on Cooling in Box Shaped Parts, PSU
Erie Plastics Engineering Technology students: Clayton Kirschner and Nicklaus Paris; advisors: J.
Meckley, M. Dropick |
| 10:25 - 10:45 am |
Heat Transfer Modeling, Pitt
PhD candidate: Mike Guido; advisor: Dr. Laura Schaefer |
| 10:45 - 11:00
am |
BREAK |
| 11:00 - noon |
ANSYS-WBE
Example: Buckling of a Step Stool,
Bill Galloway and Kyle Astor, Werner Co.
|
| noon - 1:00 pm |
Lunch:
Chicken Pot Pie, Meat
Ball Sandwiches, Fresh Fruit Salad, Assorted Sodas, Cookies |
| 1:00-1:20 pm |
Redesign of Nissan Bumper Beam, PSU Erie Mechanical Engineering students: Mike
Bardsley, Scott Bendig, and Andrew Goreczny;
advisor: A. Khalilollahi
|
| 1:20 - 1:40 pm |
GE Frame Head Design (for GEB AC Traction Motor), PSU Erie Mechanical
Engineering students: Kory Schreckengost, Adam Gallagher, Mike
Allegretto; advisor: D. Onipede
|
| 1:40-1:50 pm |
BREAK |
| 1:50 - 3:45 pm |
"Design
For Six Sigma" by Aaron Benek and Ray Browell, ANSYS Inc.
|
| 3:45 pm |
Closing and Adjournment
|